TE0713-FPGA Module with Xilinx Artix-7 100T-2C, 1 GByte DDR3L, 4 x 5 cm

The Trenz Electronic TE0713-02-72C46-A is an industrial-grade FPGA module integrating a Xilinx Artix-7 100T FPGA, USB 3.0 to FIFO bridge, 1 GByte DDR3L SDRAM, 32 MByte Flash memory for configuration and operation, and powerful switching-mode power supplies for all on-board voltages. Numerous configurable I/O's are provided via rugged high-speed strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• Xilinx Artix-7 XC7A100T-2FGG484C
• Rugged for high shock and high vibration resistance
• Industrial temperature range on request
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
• 1 GByte DDR3L 32-bit SDRAM
• 32 MByte QSPI Flash memory (with XiP support)
• USB 3.0 to FIFO interface bridge
• 152 FPGA I/O's (75 differential pairs) available via B2B connectors
• Programmable clock quad generator
  • GTP transceiver clock (default 125 MHz)
  • Fabric clock (default 200 MHz)
• External clock input for GTP transceivers via B2B connector
• 4 GTP (multi Gigabit transceiver) lanes
• On-board high-efficiency DC-DC converters
• System management and power sequencing
• eFUSE bit-stream encryption
• AES bit-stream encryption
• User configurable LED
• Evenly-spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0713-02-72C46-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 100T
• 8 x screws
• 4 x bolts

TE0710 Xilinx Artix-7:35T｜Dual fast Ethernet Artix Module with Xilinx Artix-7 100T Speedgrade 2C

The Trenz Electronic TE0710-02-35-2CF is a FPGA module integrating a Xilinx Artix-7 35T FPGA, two 10/100 Mbit Ethernet PHYs, 512 MByte DDR3 SDRAM with 8-bit width, 32 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

• Key Features

  • Xilinx Artix-7 XC7A35T-2CSG324C
  • Rugged for shock and high vibration
  • 32 MByte (256 Mbit) Quad-SPI Flash memory
  • 100 MHz MEMS oscillator
  • 512 MByte DDR3 Memory
  • Dual 100 Mbit Ethernet Phy
    • MAC Address EEPROM
  • On-board high-efficiency DC-DC converters 
    • Core voltage regulator: 4 A

    • 4.0 A x 1.0 V power rail

    • 1.0 A x 1.8 V power rail

    • 1.0 A x 1.5 V power rail

  • Power supply: either 3.3 V or 3.3 V and 5 V
  • Plug-on module with 2 x 100-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
  • Up to 112 (51 differential pairs + 10 single-ended) single-ended FPGA I/O pins available on B2B strips
  • 3 LEDs (two status LEDs and one user LED)
  • System management and power sequencing
  • eFUSE bit-stream encryption
  • AES bit-stream encryption
  • Evenly spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0710-02-35-2CF Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 35T
• 8 x screws
• 4 x bolts

TE0711 Xilinx Artix-7:35T｜High IO Xilinx Artix-7 35T Module with speedgrade 2C and USB

The Trenz Electronic TE0711-01-35-2C is a FPGA module integrating a Xilinx Artix-7 35T, 32 MByte Quad SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

• Key Features

  • Xilinx Artix-7 XC7A35T-2CSG324C
  • Rugged for shock and high vibration
  • 32 MByte QSPI Flash memory
  • 100 MHz MEMS oscillator
  • Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
  • 178 FPGA I/O's (84 differential pairs) available on board-to-board connectors
  • On-board high-efficiency DC-DC converters
    • 4.0 A x 1.0 V power rail
    • 1.0 A x 1.8 V power rail
    • 1.0 A x 1.5 V power rail
  • System management and power sequencing
  • eFUSE bit-stream encryption
  • AES bit-stream encryption
  • Four LEDs (three  freely used by user design, one system controller CPLD status LED)
  • FTDI FT2232H USB 2.0 High Speed to UART/FIFO
  • Evenly-spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0711-01-35-2C Trenz Electronic 4 x 5 cm  FPGA module with Xilinx Artix-7 35T
• 8 x screws
• 4 x bolts

TE0725 Series-Xilinx Artix-7, Flash, HyperRAM, 2 x 50-pin Headers, 2.54 mm Pitch(15T, 35T, 50T, 75T, 100T)

The Trenz Electronic TE0725 Series is a low cost small-sized FPGA module integrating a Xilinx Artix-7 15T/35T/50T/100T, 8 MByte HyperRAM and 32 MByte Flash memory for configuration and operation. The 2 x 50 pin header with a 2.54 mm standard pitch fits perfect on a perfboard.

• Key Features

  • Xilinx Artix-7 Series
  • Commercial temperature grade (industrial on request)
  • 3.5 x 7.3 cm form factor
  • 32 MByte Flash memory
  • 64 MBit (8 MByte) HyperRAM
  • 2 x 50 pin headers with 2.54 mm pitch, ideal for prefboard use
  • 87 I/O's (42 + 42 + 3)
  • 100 MHz system clock
  • I2C EEPROM
  • 3.3 V single supply with on-board voltage regulators
  • JTAG/UART connector
  • 2 LEDs
  • Optional POF Fiber Optical Adapter (125/250 MBit/s)

Scope of Delivery

• 1 x TE0725-03-15-1C Trenz Electronic FPGA module with Xilinx Artix-7 15T
• 3 x pin header, straight, double row, for J1 and J2 as well as JB1