Previous Next

介面板 │ Multi Interface Board 5

Product Summary

The proFPGA product family is a complete, scalable, and modular multi FPGA Prototyping solution, which fulfills highest needs in the area of FPGA based Prototyping. Because of its modular and scalable system architecture, the user has maximum flexibility and reusability.Part of this modular and flexible system concept is the proFPGA Multi Interface Board 5. This daughter board occupies two extension site of the proFPGA system and provides several interfaces and memories to the user like CAN Controller (SPI Interface) and CAN Transceiver, LIN Transceiver, QSPI Flash 500 Mb/1 Gb, I2S Audio CoDec (Analog Devices AD1938), Stereo Audio Input & Output via 3.5 mm Jack, 2x I²C EEPROM, SD Card Slot, Full Size, UHS-I capable, quad USB to UART converter, Lauterbach ARM JTAG/ETM Debugger connection (2x10-pin Header and Mictor-38), TotalPhase Aardvark I2C/SPI Host Adapter connection (2x5-pin Header), additional 2x10-pin JTAG Header ("Secondary JTAG")and one proFPGA Top Connector.

proFPGA Multi Interface Board 5
proFPGA Connectors 1x proFPGA extension board connector (1 at bottom-side)
Interfaces 1x CAN Controller (SPI Interface) and CAN Transceiver
1x LIN Transceiver
1x Stereo Audio Input & Output via 3.5 mm Jack
1x Lauterbach ARM JTAG/ETM Debugger connection (2x10-pin Header and Mictor-38)
1x TotalPhase Aardvark I2C/SPI Host Adapter connection (2x5-pin Header)
1x additional 2x10-pin JTAG Header ("Secondary JTAG")
1x SD Card Slot, Full Size, UHS-I capable
Others 1x QSPI Flash 500 Mb/1 Gb
1x I2S Audio CoDec (Analog Devices AD1938)
2x I²C EEPROM
1x quad USB to UART converter
Order Code PROF-A-I-MIF5
  產品文件:proFPGA 產品總覽 (EN) 
  產品編號:PROF-A-I-MIF5