Previous Next

Zynq UltraScale+ 系列 │ ZU17EG FPGA模組

Product Summary

The proFPGA product family is a complete, scalable, and modular multi FPGA Prototyping solution, which fulfills highest needs in the area of FPGA based Prototyping. Part of this modular and flexible system concept is the proFPGA Zynq™ UltraScale+™ ZU17EG FPGA module, which can be easily mounted on the proFPGA uno, duo or quad motherboard and mixed together with various other proFPGA FPGA modules. The ZU17EG FPGA module addresses customers who require a complete and powerful embedded processing platform for high performance SoC Prototyping, IP verification and early software development.

Equipped with a Xilinx Zynq™ UltraScale+™ ZU17EG FPGA which combines a uand on board interfaces like USB UART and SDIO, the board offers a complete embedded processing platform. Further interfaces like USB 3.0, Gigabit Ethernet, Display Port, SATA or CAN can be easily added via the Zynq UltraScale+ Interface Board. In addition the board offers already DDR4 memory via SODIMM slot and single QSPI flash memory.

The FPGA module offers a total of 4 extension sites on the top and bottom side with a total of 531 free standard I/Os and 16 high speed serial transceivers for extending the board with standard proFPGA or user specific extension boards or to easily interconnect it to further proFPGA FPGA modules to extend the capacity.

 

proFPGA Zynq™ UltraScale+™ ZU1EG FPGA Module Specification
FPGA Type Zynq™ UltraScale+™ ZU17EG (speedgrade 1,2 )
Capacity 5.0 M ASIC gates
Embedded Processor Core Quad-core ARM® Cortex™-A53 and Dual-core ARM® Cortex™-R5
Interfaces Processor System On-Board
USB UART interface for debugging
SDIO
External Extension Boards (e.g. via Zynq UltraScale+ Interface Board)
USB 3.0
Gigabit Ethernet
CAN
Display Port
GPIO
I2C
SATA
PMU access
Memories Processor System DDR4 memory via SO DIMM module
Single Quad SPI Flash Memory
Signaling rate Up to 1.2 Gbps (standard I/O)/ 12.5 Gbps (MGT)
Extension sites Up to 5 extension sites with high performance connectors
I/O resources 531 per FPGA module
3 x 153 I/Os (High Denistity Bank) to 2 x top/1 x bottom extension sites
1 x 72 I/Os (High Performance Bank) to top extension site
Single-ended or differential
52 x dedicated I/Os to Processor System
High Speed I/O transceivers 16 per FPGA module
1 x 8 MGTs (up to 12.5 Gb/s) to top extension site A2
1 x 8 MGTs (up to 12.5 Gb/s) to top extension site B2
4 dedicated MGTs to Processor System
Available interface boards PCIe Gen1/Gen2/Gen3, MIPI, DVI, DDR3/DDR4/Flash/LP DDR4 memory, etc.
Voltage regions 4 individually adjustable voltage regions per FPGA Module
Stepless from 1.2V up 3.3V for HD IOs and 1.0. to 1.8 for HP IOs
Clocking over proFPGA duo/quad Motherboard 8 global clock and sync signal inputs per motherboard
X fully synchronous derived clocks with sync signals
System Requirements Works only with proFPGA uno, duo or quad motherboard
Configuration Via Ethernet and USB or PCIe with proFPGA Builder Software
Power External (optional) ATX Power Supply (12 V, 24 - 35 A output)
Dimensions 5.91" x 0.95" x 5.91" / 150 mm x 24 mm x 150 mm (width x height x depth)
0.25 kg weight
Product article number PROF119 FM-XCZU17EG-R1
Order code PROF-FM-XCZU17EG-1/PROF-FM-XCZU17EG-2 (speedgrade 1/2)

20171115 04   產品編號:PROF-FM-XCZU17EG-1/PROF-FM-XCZU17EG-2 (speedgrade 1/2)

Image

ProFPGA
產品型錄

和澄科技 Haley Technology

電話 │ 886-3-5790380
傳真 │ 886-3-5790370
諮詢 │ sales@haleytech.com
地址 │ 新竹市關新路27號18樓之2

               

 

 

M有任何問題嗎? Line 我們最快! 

產品搜尋