Previous Next

TE0722| DIPFORTy Soft Propeller Xilinx Zynq-7010

TE0722|DIPFORTy1 Soft Propeller with Xilinx Zynq-7010 and 16 MByte Flash

The DIPFORTy1 "Soft Propeller" is based on the Xilinx Zynq-7010, a System on Chip which contains a FPGA and a Dual Core ARM A9+ processor with enough logic gates to become a Propeller. The board also has 16 MByte of Flash used for configuration and everything fits on a Propeller-compatible DIP 40 pinout.

DIPFORTy1 "Soft-Propeller" is the lowest cost Zynq-based module ever made and the first ZYNQ module that can use existing bases and project boards (Parallax Propeller chip compatibility). All this in a compact 1.8 x 5.1 cm form factor, at the most competitive price. 

 

Key Features

  • Xilinx Zynq-7 XC7Z010-1CLG225C
    • 16 MByte SPI Flash (primary boot)
    • 33.333 MHz Clock (MEMS Oscillator)
    • Dual Core ARM A9+
  • DIP40 form factor
    • 2 x 20 holes for socket pins or pin-header
    • Size: 18 x 51 mm
  • Total user accessible PL I/O: 46 (+3 Input only)
    • DIP40 header pins: 34 I/O
    • XMOD J1: 6 I/O
    • XMOD J2: JTAG + 2 I/O (or 3 input + 2 I/O)
    • XMOD J3: 4 I/O
  • 3.3 V single supply
  • RGB LED (PL I/O connected)
  • "Done" LED (inverted polarity)
  • User LED (ARM CPU MIO GPIO)
  • MicroSD Card socket (MIO, ZYNQ secondary boot media)
  • Sil1143 Proximity and ambient light sensor

Scope of Delivery

  • 1 x TE0722-02 Trenz Electronic module with Xilinx Zynq-7010
  • 1 x Pinheader, double row, 10-pins, straight
  • 2 x Pinheader, single row, 20-pins, straight

  產品編號:TE0722-02

  線上商店: 購買連結 可線上刷卡/享運費補助!