Previous Next

TE0710 | Xilinx Artix-7 (35T/100T)

TE0710 Xilinx Artix-7:35T|Dual fast Ethernet Artix Module with Xilinx Artix-7 100T Speedgrade 2C

The Trenz Electronic TE0710-02-35-2CF is a FPGA module integrating a Xilinx Artix-7 35T FPGA, two 10/100 Mbit Ethernet PHYs, 512 MByte DDR3 SDRAM with 8-bit width, 32 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

  • Key Features

    • Xilinx Artix-7 XC7A35T-2CSG324C
    • Rugged for shock and high vibration
    • 32 MByte (256 Mbit) Quad-SPI Flash memory
    • 100 MHz MEMS oscillator
    • 512 MByte DDR3 Memory
    • Dual 100 Mbit Ethernet Phy
      • MAC Address EEPROM
    • On-board high-efficiency DC-DC converters 
      • Core voltage regulator: 4 A
      • 4.0 A x 1.0 V power rail

      • 1.0 A x 1.8 V power rail

      • 1.0 A x 1.5 V power rail

    • Power supply: either 3.3 V or 3.3 V and 5 V
    • Plug-on module with 2 x 100-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
    • Up to 112 (51 differential pairs + 10 single-ended) single-ended FPGA I/O pins available on B2B strips
    • 3 LEDs (two status LEDs and one user LED)
    • System management and power sequencing
    • eFUSE bit-stream encryption
    • AES bit-stream encryption
    • Evenly spread supply pins for good signal integrity

Scope of Delivery

  • 1 x TE0710-02-35-2CF Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 35T
  • 8 x screws
  • 4 x bolts

  產品編號:

TE0710-02-35-2CF:Xilinx Artix-7 35T Speedgrade 2C

TE0710-02-100-2CF:Xilinx Artix-7 100T Speedgrade 2C

  線上商店: 購買連結 可線上刷卡/享運費補助!