文章

Previous Next
Products with Xilinx FPGA

TE0711｜High IO Xilinx Artix-7 (35T/100T)

TE0711 Xilinx Artix-7:35T｜High IO Xilinx Artix-7 35T Module with speedgrade 2C and USB

The Trenz Electronic TE0711-01-35-2C is a FPGA module integrating a Xilinx Artix-7 35T, 32 MByte Quad SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

  • Key Features

    • Xilinx Artix-7 XC7A35T-2CSG324C
    • Rugged for shock and high vibration
    • 32 MByte QSPI Flash memory
    • 100 MHz MEMS oscillator
    • Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
    • 178 FPGA I/O's (84 differential pairs) available on board-to-board connectors
    • On-board high-efficiency DC-DC converters
      • 4.0 A x 1.0 V power rail
      • 1.0 A x 1.8 V power rail
      • 1.0 A x 1.5 V power rail
    • System management and power sequencing
    • eFUSE bit-stream encryption
    • AES bit-stream encryption
    • Four LEDs (three  freely used by user design, one system controller CPLD status LED)
    • FTDI FT2232H USB 2.0 High Speed to UART/FIFO
    • Evenly-spread supply pins for good signal integrity

Scope of Delivery

  • 1 x TE0711-01-35-2C Trenz Electronic 4 x 5 cm  FPGA module with Xilinx Artix-7 35T
  • 8 x screws
  • 4 x bolts

  產品編號：

TE0711-01-35-2C：High IO Xilinx Artix-7 35T

TE0711-01-100-2C：High IO Xilinx Artix-7 100T
  線上商店： 購買連結 可線上刷卡/享運費補助！