Previous Next

TE0841|Xilinx Kintex UltraScale Series

TE0841 Series-Xilinx Kintex UltraScale, DDR4, Flash, 8 x GTH Transceiver(KU035, KU040)

The Trenz Electronic TE0841 Series is a FPGA module integrating a Xilinx Kintex UltraScale KU035 / KU040, 2 GByte DDR4 SDRAM, 64 MByte QSPI Flash for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

  • Xilinx Kintex UltraScale Series
  • Rugged for industrial application
  • Size: 40 x 50 mm
  • 3 mm mounting holes for skyline heat spreader
  • 2 banks of 1024 MByte DDR4 SDRAM, 32bit wide memory interface (each DDR 16bit separate)
  • 64 MByte (512 MBit) SPI Boot-Flash
  • B2B Connectors: 3 x Razor Beam High-Speed Hermaphroditic Terminal/Socket Strips (regular 4 mm), total 260 terminals
    • 60 x HR I/Os
    • 84 x HP I/Os
    • Serial transceiver: GTH 8 lanes (TX/RX)
    • 2 x MGT external clock inputs
  • Clocking
    • Si5338 - 4 output PLL, GT and PL clocks
    • 200 MHz LVDS oscillator
  • Power
    • All power supplies on board, single supply operation supported.
    • User defined IO-Bank power
  • Evenly spread supply pins for good signal integrity.

Scope of Delivery

  • 1 x TE0841-02-31C21-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Kintex UltraScale XCKU035 (commercial temperature range)
  • 8 x screws
  • 4 x bolts

  產品編號:

TE0841-02-31C21-A:Xilinx Kintex UltraScale KU035, 2 GByte DDR4, 4 x 5 cm

TE0841-02-41C21-A:Xilinx Kintex UltraScale KU040, 1C,2 GByte DDR4, 4 x 5 cm

TE0841-02-41I21-A:Xilinx Kintex UltraScale KU040, 2 GByte DDR4, 4 x 5 cm

TE0841-02-32I21-A:Xilinx Kintex UltraScale KU035-2, 2 GByte DDR4, 4 x 5 cm

  線上商店: 購買連結 可線上刷卡/享運費補助!