Previous Next

TE0783| Xilinx Zynq Z-7045

TE0783-High-Performance SoM with Xilinx Zynq Z-7045, Memory on both PS+PL, 8.5 x 8.5

The Trenz Electronic TE0783 is a high-performance, industrial-grade SoM (System on Module) based on Xilinx Zynq-7000 SoC (XC7Z045) with 1 GByte (32-bit) DDR3 RAM connected to PS, 2 GByte (64-bit) DDR3 RAM connected to PL, 4 GByte e.MMC, 16 GTX high-performance transceiver lanes, 32 MByte QSPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. 

Features

  • Xilinx Zynq-7000 XC7Z045-2FFG900I SoC
  • Rugged for shock and high vibration
  • Large number of configurable I/Os are provided via rugged high-speed stacking strips
  • Dual ARM Cortex-A9 MPCore
    • 1 GByte (32-bit) DDR3 RAM connected to PS
    • 2 GByte (64-bit) DDR3 RAM connected to PL
    • 32 MByte QSPI Flash memory
    • Hi-Speed USB 2.0 ULPI transceiver PHY
    • Gigabit (10/100/1000 Mbps) Ethernet transceiver PHY
    • 4 GByte e.MMC (optional up to 64 GByte)
  • Lattice MachXO2 HC 4000 System Controller CPLD
    • 40 GPIO's available to user on B2B connector
  • MAC-address EEPROM
  • Serial user EEPROM
  • Temperature compensated RTC (real-time clock)
  • Si5338A programmable quad PLL clock generator for GTX transceiver clocks
  • Plug-on module with 3 x 160-pin high-speed strips
    • 16 GTX high-performance transceiver
    • 4 x GT transceiver clock inputs
    • 166 FPGA I/O's (83 LVDS pairs)
  • On-board high-efficiency switch-mode DC-DC converters
  • System management
  • eFUSE bit-stream encryption
  • AES bit-stream encryption
  • Evenly-spread supply pins for good signal integrity
  • User LED

Scope of Delivery

  • 1 x TE0783-02-92I33MA Trenz Electronic SoM with Xilinx Zynq-7045 FPGA

  產品編號:TE0783-02-92I33MA

  線上商店: 購買連結 可線上刷卡/享運費補助!