Previous Next

TE0705| Carrier Boards for 4 x 5

TE0705 - Simplified carrier board based upon TE0701

The baseboard TE0705 is a "downgraded" version from TE0701 and it provides low-cost connection and extension to Trenz Electronic modules with a standard footprint of 4 x 5 cm.

As little as possible has been changed in functionality (except the functionality that was removed).

Key Features

  • Trenz 4 x 5 module socket (3 x Samtec LSHM connectors)
  • RJ45 GbE Ethernet
  • Micro USB connector (Device, Host or OTG modes)
  • SD Card connector
  • High performance DCDC converter for local supplies
  • Carrier controller Lattice MachXO2 CPLD
    • 1200 Macrocell CPLD with Block RAM, Flash and PLL
    • 8 User LEDs mappable to different functions
    • 2 User Pushbuttons mappable to different functions
    • 80 I/O's
  • USB JTAG interface
    • Mini USB connector
    • Compatible with Xilinx tools
    • Based on FT2232H USB chip

Scope of Delivery

  • 1 x TE0705-04 carrier board for Trenz Electronic modules with 4 x 5 cm footprint
  • 1 x Mini-Fit JR Receptacle 2Pol.
  • 4 x Mini-Fit Female Crimp Terminal 18-24 AWG

Use with TE0715-xx-30-xx
For use with TE0715-xx-30-xx or any other 4 x 5 module that has some banks without 3.3V tolerance the I/O voltage must be changed by moving the jumper J21 to position "VADJ".It may be requried to update the CPLD on TE0705 first.

產品編號:TE0705-04

 線上商店: 購買連結 可線上刷卡/享運費補助!