TE0712-FPGA Module with Xilinx Artix-7 XC7A35T-2FGG484I, 1 GByte DDR3, 4 x 5 cm
The Trenz Electronic TE0712-02-42I36-A is an industrial-grade FPGA module integrating a Xilinx Artix-7 35T FPGA, 1 GByte of DDR3 SDRAM, 32 MByte Flash memory for configuration and operation, a 10/100 Mbit Ethernet transceiver, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.
All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.
Key Features
- Xilinx Artix-7 XC7A35T-2FGG484I
- Rugged for high shock resistance and high vibration
- 32 MByte (256 Mbit) Quad-SPI Flash memory
- 4 GTP (high-performance transceiver) lanes
- GTP (high-performance transceiver) clock input
- 1 GByte (32-bit) DDR3 SDRAM
- 10/100 Mbit Ethernet PHY in RMII Mode
- MAC address EEPROM
- Programmable Low Jitter PLL (Silicon Labs Si5338)
- On-board high-efficiency DC-DC converters
- 12 A x 1.0V power rail
- 1.5 A x 1.8V power rail
- 1.5 A x 1.5V power rail
- Supply voltages: either 3.3V or 3.3V and 5V
- Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
- 128 FPGA I/O's (63 differential pairs) available on board-to-board connectors
- System management and power sequencing
- eFUSE bit-stream encryption
- AES bit-stream encryption
- Two User configurable LEDs
- Evenly spread supply pins for good signal integrity
Scope of Delivery
- 1 x TE0712-02-42I36-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 35T
- 8 x screws
- 4 x bolts
 |
產品編號： TE0712-02-42I36-A：Xilinx Artix-7 XC7A35T-2FGG484I TE0712-03-71I36-A：Xilinx Artix-7 XC7A100T-1FGG484I TE0712-03-72C36-A：Xilinx Artix-7 XC7A100T-2FGG484C |
 |
線上商店： 購買連結 可線上刷卡/享運費補助！ |
