TE0741 Series-Xilinx Kintex-7, Flash, 8 High Speed Serial Transceivers, 25 MHz Oscillator（70T/160T/325T/410T ）
The Trenz Electronic TE0741 Series is a FPGA module integrating a Xilinx Kintex-7T FPGA, 8 MGTs (Multi Gigabit Transceivers) and 32 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via rugged high-speed stacking strips.
All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.
Key Features
- Xilinx Kintex-7（70T/160T/325T/410T ）
- 256 MBit (32 MByte) Quad-SPI Flash memory (for configuration and operation) accessible through:
- FPGA
- JTAG port (SPI indirect)
- 8 MGTs (multi gigabit transceivers)
- FPGA configuration through:
- JTAG (B2B connector)
- SPI Flash memory
- 25 MHz low jitter oscillator with shutdown control
- Programmable quad clock generator (Silicon Labs Si5338)
- On-board high-efficiency DC-DC converters
- MGT voltage regulators with control enable
- Core voltage regulators: up to 30 A (variants depend)
- Supply voltages: either 3.3 V or 3.3 V and 5 V
- Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
- Up to 144 (94 for 70T) single-ended FPGA I/O pins available on B2B strips
- 2 user LEDs, 1 DONE FPGA pin LED
- AES bit-stream encryption
- Evenly spread supply pins for good signal integrity
Scope of Delivery
- 1 x TE0741-04-A2C-1-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Kintex-7 70T
- 8 x screws
- 4 x bolts
 |
產品編號： TE0741-04-A2C-1-A：70T-2CF TE0741-04-A2I-1-A：70T-2IF TE0741-04-B2C-1-AF：160T-2C1 TE0741-04-B2I-1-A：160T-2IF TE0741-04-B2C-1-A：160T-2CF TE0741-04-D2C-1-A：325T-2CF TE0741-04-D2I-1-A：325T-2IF TE0741-04-G2I-1-A：410T-2IF TE0741-04-G2C-1-A：410T-2CF |
 |
線上商店： 購買連結 可線上刷卡/享運費補助！ |
