TE0841－Micromodule with Xilinx Kintex UltraScale KU040, 2 GB DDR4, 4 x 5, low profile
The Trenz Electronic TE0841-02-41I21-L is an industrial-grade FPGA module integrating a Xilinx Kintex UltraScale KU040, 2 GByte DDR4, 64 MByte QSPI Flash for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.
All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.
Key Features
- Xilinx Kintex UltraScale KU040 FPGA XCKU040-1SFVA784I
- Rugged for industrial application
- Size: 40 x 50 mm
- 3 mm mounting holes for skyline heat spreader
- 2 banks of 1024 MByte DDR4 SDRAM, 32bit wide memory interface (each DDR 16bit separate)
- 64 MByte (512 MBit) QSPI Boot Flash
- B2B Connectors: 3 x Razor Beam High-Speed Hermaphroditic Terminal/Socket Strips (low profile 2.5 mm), total 260 terminals
- 60 x HR I/Os
- 84 x HP I/Os
- Serial transceiver: GTH 8 lanes (TX/RX)
- 2 x MGT external clock inputs
- Clocking
- Si5338 - 4 output PLL, GT and PL clocks
- 200 MHz LVDS oscillator
- Power
- All power supplies on board, single supply operation supported.
- User defined IO-Bank power
- Evenly spread supply pins for good signal integrity
Scope of Delivery
- 1 x TE0841-02-41I21-L Trenz Electronic 4 x 5 cm FPGA module with Xilinx Kintex UltraScale XCKU040, low profile
 |
產品編號：TE0841-02-41I21-L |
 |
線上商店： 購買連結 可線上刷卡/享運費補助！ |
