TEBA0841－TEBA0841 - Simple base for TE0841 and TE0741
The Trenz Electronic TEBA0841 is a low cost carrier board for testing, evaluation and development purposes of TE0841 and TE0741 FPGA modules. Although this base-board is dedicated to the modules TE0841 and TE0741, it is also compatible with other Trenz Electronic 4 x 5 cm SoMs. The carrier board offers one SFP connector, one Micro USB2 B connector, two 2 x 25-pin headers and one XMOD header to get access to the I/O's and interfaces of FPGA modules. To test and evaluate the Multi-Gigabit transceiver units of the FPGA module, 6 MGT lanes on the carrier board are routed in a loop-back circuit on the B2B connectors.
Key Features
- 3 x Trenz Electronic 4 x 5 module B2B connectors (Samtec LSHM series)
- SFP+ connector (enhanced small form-factor pluggable), supports data transmission rates up to 10 Gbit/s
- Micro USB2 type B connector
- 4 x 5 SoM programmable by XMOD header
- Soldering-pads for pin headers for access to SoM's I/O-bank pins, usable as LVDS-pairs
- Soldering-pads for pin headers for access to further interfaces and I/O's of the SoM
- 2 x user LEDs routed to I/O-pins of the SoM
- 4-bit DIP switch for setting module parameters
- 4 x VCCIO selection jumper to set module's bank voltages
Scope of Delivery
- 1 x TEBA0841-02 Trenz Electronic carrier board for TE0841, TE0741 and compatible modules
- 1 x TE0790-03 XMOD FTDI JTAG Adapter - Xilinx compatible (pre-assembled)
This adapter is not suitable for the supply of basic board + module; a power supply has to be attached seperately. - 2 x Pin Header, straight, double row, 50 pins
- 4 x Jumper
 |
產品編號：TEBA0841-02 |
 |
線上商店： 購買連結 可線上刷卡/享運費補助！ |
