Articles

TE0716 - SoM with Xilinx Zynq-7000 SoC XC7Z020, 1 GByte DDR3L, 45 x 65 mm

The Trenz Electronic TE0716 is a commercial-grade* SoM (System on Module) based on Xilinx Zynq-7000 SoC XC7Z020*, with 1 GByte of DDR3L-1600 SDRAM*, 32 MByte of SPI Flash memory, 10 x 12-Bit Low Power SAR ADCs, 512 Kb serial EEPROM, Gigabit Ethernet PHY transceiver, an USB PHY transceiver, a single chip USB2.0 to UART/JTAG interface (Xilinx license included), and powerful switching-mode power supplies for all on-board voltages. A large number of configurable I/Os are provided via rugged high-speed board-to-board connectors.

Key Features

• SoC/FPGA
  • Package: CLG484
  • Device: Xilinx Z-7020
  • Speed: -1 *
  • Temperature: C grade *.
• RAM/Storage
  • Low Power DDR3 SDRAM on PS
    • Data width: 32bit
    • Size: def. 1GB *
    • Speed: 1600 Mbps **
  • QSPI boot Flash
    • Data width: 4bit
    • Size: 32MB *
  • MAC address serial EEPROM with EUI-48™ node identity
  • 512Kb user MAC address serial EEPROM.
• On Board
  • 10x 12-Bit Low Power SAR ADCs up to 2 MSPS
  • Low Power Oscillators.
  • Gigabit Ethernet PHY transceiver
  • High-Speed USB 2.0 ULPI transceiver with full OTG support
  • Single chip High-Speed USB 2.0 to UART/JTAG Interface (Xilinx License included) (FTDI FT2232H).
  • 2 x User RGB LEDs (Green), LED FPGA "Done" (Green).
  • 2 x Tactile Switches (User), 1 x Tactile Switche (Reset).
• Interface
  • 120 x HR PL I/Os (3 banks).
  • 2 x PS MIOs (shared with UART TX/RX ZYNQ-FTDI).
  • 1 Gbps RGMII Ethernet interface.
  • High Speed USB 2.0 ULPI with full OTG support.
  • High Speed USB 2.0 to UART/JTAG interface, including microUSB-B connector.
  • microSD
  • JTAG
• Power
  • On-board high-efficiency DC-DC converters for all voltages used.
• Dimension
  • 45 x 65 mm
• Notes
  • * depends on assembly version
  • ** depends on used Zynq and DDR3 combination

Scope of Delivery

• 1 x TE0716-01-61C32-A SoM with Xilinx Zynq-7000 SoC XC7Z020

	產品編號： TE0716-01-61C32-A
	線上商店： 購買連結 可線上刷卡/享運費補助！