TE0722｜DIPFORTy1 Soft Propeller with Xilinx Zynq-7010 and 16 MByte Flash
The DIPFORTy1 "Soft Propeller" is based on the Xilinx Zynq-7010, a System on Chip which contains a FPGA and a Dual Core ARM A9+ processor with enough logic gates to become a Propeller. The board also has 16 MByte of Flash used for configuration and everything fits on a Propeller-compatible DIP 40 pinout.
DIPFORTy1 "Soft-Propeller" is the lowest cost Zynq-based module ever made and the first ZYNQ module that can use existing bases and project boards (Parallax Propeller chip compatibility). All this in a compact 1.8 x 5.1 cm form factor, at the most competitive price.
Key Features
- Xilinx Zynq-7 XC7Z010-1CLG225C
- 16 MByte SPI Flash (primary boot)
- 33.333 MHz Clock (MEMS Oscillator)
- Dual Core ARM A9+
- DIP40 form factor
- 2 x 20 holes for socket pins or pin-header
- Size: 18 x 51 mm
- Total user accessible PL I/O: 46 (+3 Input only)
- DIP40 header pins: 34 I/O
- XMOD J1: 6 I/O
- XMOD J2: JTAG + 2 I/O (or 3 input + 2 I/O)
- XMOD J3: 4 I/O
- 3.3 V single supply
- RGB LED (PL I/O connected)
- "Done" LED (inverted polarity)
- User LED (ARM CPU MIO GPIO)
- MicroSD Card socket (MIO, ZYNQ secondary boot media)
- Sil1143 Proximity and ambient light sensor
Scope of Delivery
- 1 x TE0722-02 Trenz Electronic module with Xilinx Zynq-7010
- 1 x Pinheader, double row, 10-pins, straight
- 2 x Pinheader, single row, 20-pins, straight
 |
產品編號：TE0722-02 |
 |
線上商店： 購買連結 可線上刷卡/享運費補助！ |
